Delay in switching on and off
 |
 |
| Vector | C | ST | |
| in the palette | on the schematic |
The block implements the delay (waiting for confirmation) of the input signal for a predetermined time in case of any change in the input logical signal:
where y(t) is the output signal of the block, x(t) is the input signal, T1, T2 are the confirmation time constants (for switching on and switching off, respectively). Important: the output of the block can take the values either 0 or 1.
where y(t) is the output signal of the block, x(t) is the input signal, T1, T2 are the confirmation time constants (for switching on and switching off, respectively). Important: the output of the block can take the values either 0 or 1.
Inputs
- B0 - block input.
Outputs
- B01 - block output.
Properties
- Confirmation times for switching on, sec – switching on delay T1.
- Confirmation times for switching off, sec – switching off delay T2.
- Way to set the confirmation time – if the way to set the "Input" is specified, then the delay time is taken from the second additional input.
Parameters
- Time to stop of timer for switching on - the current countdown value of the on delay timer.
- Time to stop of timer for switching off - the current countdown value of the on delay timer.