|
|
|
| in the palette |
on the schematic |
The block implements the selection of the maximum of three input signals from the modules with further proportional conversion, filtering and limitation. It can be used to simulate a three-channel current sensor that converts current to voltage.
Inputs
| Parameter |
Description |
Communication line type |
| Iabc |
Three-channel input of BDCM phase current signals |
Mathematical |
Outputs
| Name |
Description |
Communication line type |
| I |
Output signal |
Mathematical |
Properties
| Description |
Name |
Description |
Default value |
Data type |
| Maximum value of the input value, V |
Uin_max |
Maximum value of the input value. Sets the range of operation |
1 |
Вещественное |
| Maximum value of the output value |
Uout_max |
The output value (limit level) corresponding to the maximum input. Sets the scale of the conversion |
3.19 |
Вещественное |
| Aperiodic filter time constant, s |
Ti |
Aperiodic signal filter time constant |
5E-5 |
Вещественное |
Parameters
The block has no parameters.
