 |
 |
| C | ST | |
| в палитре | на схеме |
The block is used inside the Submodel and determines whether it has an input port. It is used to connect the external part of the circuit with the circuit inside the Submodel. The block organizes the reception of data from type blocks and Submodels external to this Submodel, as well as the transfer of data for transformation by type blocks (or Submodels) of the internal structure of this Submodel. Number of blocks "Input Port" automatically determines the number of inputs to this Submodel. "Input Port" can process both scalar and vector input signals.
Свойства
- Constant if not connected - a discrete value, specifies the ability of the port to output a constant value if nothing is connected to it from outside the submodel;
- Default value - the array, sets the constant value of the port signal in case nothing is connected to it outside the submodel, and the "Constant if not connected" property is set to Yes;
- Data type (for code generation) - the type of port data, used when generating code from the calculation schematic.
Параметры
none
Прим.: it is recommended to assign a unique name to this block immediately after transferring it from the block library to the Schematic window: for example, "Input No. 1". In order to specify the name of the connection point, double-click on the block.
