 |
 |
| C | |
| в палитре | на схеме |
The block is a switch that connects one of the analog input signals (X1 or X2) to the output. The switching is controlled by two binary inputs (X3 and X4). The logic of the block operation for two input signals is presented in the table.
| X3 | X4 | Y |
|---|---|---|
| 0 | 0 | 0 |
| 0 | 1 | X2 |
| 1 | 0 | X1 |
| 1 | 1 | X1 |
Inputs/Outputs
The number of input analog signals can be configured in the block parameters. At the same time, the total number of input ports will be 2 times more, since there are the same number of switching control signals.
Свойства
none
Параметры
none
